Fix Docker builds, polylith components (#1269)

build/docker/config/dendrite-config.yaml

@@ -1,41 +1,233 @@
-# The config file format version
+# This is the Dendrite configuration file.
-# This is used by dendrite to tell if it understands the config format.
+#
-# This will change if the structure of the config file changes or if the meaning
+# The configuration is split up into sections - each Dendrite component has a
-# of an existing config key changes.
+# configuration section, in addition to the "global" section which applies to
-version: 0
+# all components.
+#
+# At a minimum, to get started, you will need to update the settings in the
+# "global" section for your deployment, and you will need to check that the
+# database "connection_string" line in each component section is correct. 
+#
+# Each component with a "database" section can accept the following formats
+# for "connection_string":
+#   SQLite:     file:filename.db
+#               file:///path/to/filename.db
+#   PostgreSQL: postgresql://user:pass@hostname/database?params=...
+#
+# SQLite is embedded into Dendrite and therefore no further prerequisites are
+# needed for the database when using SQLite mode. However, performance with
+# PostgreSQL is significantly better and recommended for multi-user deployments.
+# SQLite is typically around 20-30% slower than PostgreSQL when tested with a
+# small number of users and likely will perform worse still with a higher volume
+# of users.
+#
+# The "max_open_conns" and "max_idle_conns" settings configure the maximum 
+# number of open/idle database connections. The value 0 will use the database
+# engine default, and a negative value will use unlimited connections. The
+# "conn_max_lifetime" option controls the maximum length of time a database
+# connection can be idle in seconds - a negative value is unlimited.
 
-# The matrix specific config
+# The version of the configuration file. 
-matrix:
+version: 1
-    # The name of the server. This is usually the domain name, e.g 'matrix.org', 'localhost'.
+
-    server_name: "example.com"
+# Global Matrix configuration. This configuration applies to all components.
-    # The path to the PEM formatted matrix private key.
+global:
-    private_key: "matrix_key.pem"
+  # The domain name of this homeserver.
-    # The x509 certificates used by the federation listeners for this server
+  server_name: example.com
-    federation_certificates: ["server.crt"]
+
-    # The list of identity servers trusted to verify third party identifiers by this server.
+  # The path to the signing private key file, used to sign requests and events.
-    # Defaults to no trusted servers.
+  private_key: matrix_key.pem
+
+  # A unique identifier for this private key. Must start with the prefix "ed25519:".
+  key_id: ed25519:auto
+
+  # How long a remote server can cache our server signing key before requesting it
+  # again. Increasing this number will reduce the number of requests made by other
+  # servers for our key but increases the period that a compromised key will be
+  # considered valid by other homeservers.
+  key_validity_period: 168h0m0s
+
+  # Lists of domains that the server will trust as identity servers to verify third
+  # party identifiers such as phone numbers and email addresses.
   trusted_third_party_id_servers:
-      - vector.im
   - matrix.org
+  - vector.im
 
-# The media repository config
+  # Configuration for Kafka/Naffka.
-media:
+  kafka:
-    # The base path to where the media files will be stored. May be relative or absolute.
+    # List of Kafka broker addresses to connect to. This is not needed if using
+    # Naffka in monolith mode.
+    addresses:
+      - kafka:9092
+
+    # The prefix to use for Kafka topic names for this homeserver. Change this only if
+    # you are running more than one Dendrite homeserver on the same Kafka deployment.
+    topic_prefix: Dendrite
+
+    # Whether to use Naffka instead of Kafka. This is only available in monolith
+    # mode, but means that you can run a single-process server without requiring
+    # Kafka.
+    use_naffka: false
+
+    # Naffka database options. Not required when using Kafka.
+    naffka_database:
+      connection_string: file:naffka.db
+      max_open_conns: 100
+      max_idle_conns: 2
+      conn_max_lifetime: -1
+
+  # Configuration for Prometheus metric collection.
+  metrics:
+    # Whether or not Prometheus metrics are enabled.
+    enabled: false
+
+    # HTTP basic authentication to protect access to monitoring.
+    basic_auth:
+      username: metrics
+      password: metrics
+
+# Configuration for the Appservice API.
+app_service_api:
+  internal_api:
+    listen: http://0.0.0.0:7777
+    connect: http://appservice_api:7777
+  database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_appservice?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # Appservice configuration files to load into this homeserver.
+  config_files: []
+
+# Configuration for the Client API.
+client_api:
+  internal_api:
+    listen: http://0.0.0.0:7771
+    connect: http://client_api:7771
+  external_api:
+    listen: http://0.0.0.0:8071
+
+  # Prevents new users from being able to register on this homeserver, except when
+  # using the registration shared secret below.
+  registration_disabled: false
+
+  # If set, allows registration by anyone who knows the shared secret, regardless of
+  # whether registration is otherwise disabled.
+  registration_shared_secret: ""
+
+  # Whether to require reCAPTCHA for registration.
+  enable_registration_captcha: false
+
+  # Settings for ReCAPTCHA. 
+  recaptcha_public_key: ""
+  recaptcha_private_key: ""
+  recaptcha_bypass_secret: ""
+  recaptcha_siteverify_api: ""
+
+  # TURN server information that this homeserver should send to clients. 
+  turn:
+    turn_user_lifetime: ""
+    turn_uris: []
+    turn_shared_secret: ""
+    turn_username: ""
+    turn_password: ""
+
+# Configuration for the Current State Server.
+current_state_server:
+  internal_api:
+    listen: http://0.0.0.0:7782
+    connect: http://current_state_server:7782
+  database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_currentstate?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for the EDU server.
+edu_server:
+  internal_api:
+    listen: http://0.0.0.0:7778
+    connect: http://edu_server:7778
+
+# Configuration for the Federation API.
+federation_api:
+  internal_api:
+    listen: http://0.0.0.0:7772
+    connect: http://federation_api:7772
+  external_api:
+    listen: http://0.0.0.0:8072
+
+  # List of paths to X.509 certificates to be used by the external federation listeners.
+  # These certificates will be used to calculate the TLS fingerprints and other servers
+  # will expect the certificate to match these fingerprints. Certificates must be in PEM
+  # format.
+  federation_certificates: []
+
+# Configuration for the Federation Sender.
+federation_sender:
+  internal_api:
+    listen: http://0.0.0.0:7775
+    connect: http://federation_sender:7775
+  database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_federationsender?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # How many times we will try to resend a failed transaction to a specific server. The
+  # backoff is 2**x seconds, so 1 = 2 seconds, 2 = 4 seconds, 3 = 8 seconds etc.
+  send_max_retries: 16
+
+  # Disable the validation of TLS certificates of remote federated homeservers. Do not
+  # enable this option in production as it presents a security risk!
+  disable_tls_validation: false
+
+  # Use the following proxy server for outbound federation traffic.
+  proxy_outbound:
+    enabled: false
+    protocol: http
+    host: localhost
+    port: 8080
+
+# Configuration for the Key Server (for end-to-end encryption).
+key_server:
+  internal_api:
+    listen: http://0.0.0.0:7779
+    connect: http://key_server:7779
+  database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_keyserver?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for the Media API.
+media_api:
+  internal_api:
+    listen: http://0.0.0.0:7774
+    connect: http://media_api:7774
+  external_api:
+    listen: http://0.0.0.0:8074
+  database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_mediaapi?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+  # Storage path for uploaded media. May be relative or absolute.
   base_path: /var/dendrite/media
 
-    # The maximum file size in bytes that is allowed to be stored on this server.
+  # The maximum allowed file size (in bytes) for media uploads to this homeserver
-    # Note: if max_file_size_bytes is set to 0, the size is unlimited.
+  # (0 = unlimited).
-    # Note: if max_file_size_bytes is not set, it will default to 10485760 (10MB)
   max_file_size_bytes: 10485760
 
-    # Whether to dynamically generate thumbnails on-the-fly if the requested resolution is not already generated
+  # Whether to dynamically generate thumbnails if needed.
-    # NOTE: This is a possible denial-of-service attack vector - use at your own risk
   dynamic_thumbnails: false
 
-    # A list of thumbnail sizes to be pre-generated for downloaded remote / uploaded content
+  # The maximum number of simultaneous thumbnail generators to run.
-    # method is one of crop or scale. If omitted, it will default to scale.
+  max_thumbnail_generators: 10
-    # crop scales to fill the requested dimensions and crops the excess.
+
-    # scale scales to fit the requested dimensions and one dimension may be smaller than requested.
+  # A list of thumbnail sizes to be generated for media content.
   thumbnail_sizes:
   - width: 32
     height: 32
@@ -43,91 +235,90 @@ media:
   - width: 96
     height: 96
     method: crop
-      - width: 320
-        height: 240
-        method: scale
   - width: 640
     height: 480
     method: scale
-      - width: 800
-        height: 600
-        method: scale
 
-# The config for the TURN server
+# Configuration for the Room Server.
-turn:
+room_server:
-    # Whether or not guests can request TURN credentials
+  internal_api:
-    turn_allow_guests: true
+    listen: http://0.0.0.0:7770
-    # How long the authorization should last
+    connect: http://room_server:7770
-    turn_user_lifetime: "1h"
-    # The list of TURN URIs to pass to clients
-    turn_uris: []
-
-    # Authorization via Shared Secret
-    # The shared secret from coturn
-    turn_shared_secret: "<SECRET STRING GOES HERE>"
-
-    # Authorization via Static Username & Password
-    # Hardcoded Username and Password
-    turn_username: ""
-    turn_password: ""
-
-# The config for communicating with kafka
-kafka:
-    # Where the kafka servers are running.
-    addresses: ["kafka:9092"]
-    # Whether to use naffka instead of kafka.
-    # Naffka can only be used when running dendrite as a single monolithic server.
-    # Kafka can be used both with a monolithic server and when running the
-    # components as separate servers.
-    # If enabled database.naffka must also be specified.
-    use_naffka: false
-    # The names of the kafka topics to use.
-    topics:
-        output_room_event: roomserverOutput
-        output_client_data: clientapiOutput
-        output_typing_event: eduServerOutput
-        user_updates: userUpdates
-
-
-# The postgres connection configs for connecting to the databases e.g a postgres:// URI
   database:
-    account: "postgres://dendrite:itsasecret@postgres/dendrite_account?sslmode=disable"
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_roomserver?sslmode=disable
-    device: "postgres://dendrite:itsasecret@postgres/dendrite_device?sslmode=disable"
+    max_open_conns: 100
-    media_api: "postgres://dendrite:itsasecret@postgres/dendrite_mediaapi?sslmode=disable"
+    max_idle_conns: 2
-    sync_api: "postgres://dendrite:itsasecret@postgres/dendrite_syncapi?sslmode=disable"
+    conn_max_lifetime: -1
-    room_server: "postgres://dendrite:itsasecret@postgres/dendrite_roomserver?sslmode=disable"
-    server_key: "postgres://dendrite:itsasecret@postgres/dendrite_serverkey?sslmode=disable"
-    federation_sender: "postgres://dendrite:itsasecret@postgres/dendrite_federationsender?sslmode=disable"
-    current_state: "postgres://dendrite:itsasecret@postgres/dendrite_currentstate?sslmode=disable"
-    appservice: "postgres://dendrite:itsasecret@postgres/dendrite_appservice?sslmode=disable"
-    # If using naffka you need to specify a naffka database
-    #naffka: "postgres://dendrite:itsasecret@postgres/dendrite_naffka?sslmode=disable"
 
-# The TCP host:port pairs to bind the internal HTTP APIs to.
+# Configuration for the Server Key API (for server signing keys).
-# These shouldn't be exposed to the public internet.
+server_key_api:
-# These aren't needed when running dendrite as a monolithic server.
+  internal_api:
-listen:
+    listen: http://0.0.0.0:7780
-    room_server: "room_server:7770"
+    connect: http://server_key_api:7780
-    client_api: "client_api:7771"
+  database:
-    federation_api: "federation_api:7772"
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_serverkey?sslmode=disable
-    server_key_api: "server_key_api:7778"
+    max_open_conns: 100
-    sync_api: "sync_api:7773"
+    max_idle_conns: 2
-    media_api: "media_api:7774"
+    conn_max_lifetime: -1
-    current_state_server: "current_state_server:7775"
-    federation_sender: "federation_sender:7776"
-    edu_server: "edu_server:7777"
-    key_server: "key_server:7779"
-    user_api: "user_api:7780"
-    appservice_api: "appservice_api:7781"
 
-# The configuration for tracing the dendrite components.
+  # Perspective keyservers to use as a backup when direct key fetches fail. This may
+  # be required to satisfy key requests for servers that are no longer online when
+  # joining some rooms.
+  key_perspectives:
+  - server_name: matrix.org
+    keys:
+    - key_id: ed25519:auto
+      public_key: Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw
+    - key_id: ed25519:a_RXGa
+      public_key: l8Hft5qXKn1vfHrg3p4+W8gELQVo8N13JkluMfmn2sQ
+
+# Configuration for the Sync API.
+sync_api:
+  internal_api:
+    listen: http://0.0.0.0:7773
+    connect: http://sync_api:7773
+  external_api:
+      listen: http://0.0.0.0:8073
+  database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_syncapi?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for the User API.
+user_api:
+  internal_api:
+    listen: http://0.0.0.0:7781
+    connect: http://user_api:7781
+  account_database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_account?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+  device_database:
+    connection_string: postgresql://dendrite:itsasecret@postgres/dendrite_device?sslmode=disable
+    max_open_conns: 100
+    max_idle_conns: 2
+    conn_max_lifetime: -1
+
+# Configuration for Opentracing.
 tracing:
-    # Config for the jaeger opentracing reporter.
+  enabled: false
-    # See https://godoc.org/github.com/uber/jaeger-client-go/config#Configuration
-    # for documentation.
   jaeger:
-        disabled: true
+    serviceName: ""
+    disabled: false
+    rpc_metrics: false
+    tags: []
+    sampler: null
+    reporter: null
+    headers: null
+    baggage_restrictions: null
+    throttler: null
 
-# A list of application service config files to use
+# Logging configuration, in addition to the standard logging that is sent to
-application_services:
+# stdout by Dendrite.
-    config_files: []
+logging:
+- type: file
+  level: info
+  params:
+    path: /var/log/dendrite

build/docker/docker-compose.polylith.yml

@@ -5,9 +5,9 @@ services:
     image: matrixdotorg/dendrite:clientproxy
     command: [
       "--bind-address=:8008",
-      "--client-api-server-url=http://client_api:7771",
+      "--client-api-server-url=http://client_api:8071",
-      "--sync-api-server-url=http://sync_api:7773",
+      "--sync-api-server-url=http://sync_api:8073",
-      "--media-api-server-url=http://media_api:7774"
+      "--media-api-server-url=http://media_api:8074"
     ]
     volumes:
       - ./config:/etc/dendrite
@@ -92,8 +92,8 @@ services:
     image: matrixdotorg/dendrite:federationproxy
     command: [
       "--bind-address=:8448",
-      "--federation-api-url=http://federation_api:7772",
+      "--federation-api-url=http://federation_api:8072",
-      "--media-api-server-url=http://media_api:7774"
+      "--media-api-server-url=http://media_api:8074"
     ]
     volumes:
       - ./config:/etc/dendrite

build/docker/postgres/create_db.sh

@@ -1,5 +1,5 @@
 #!/bin/bash
 
-for db in account device mediaapi syncapi roomserver serverkey federationsender currentstate appservice e2ekey naffka; do
+for db in account device mediaapi syncapi roomserver serverkey keyserver federationsender currentstate appservice e2ekey naffka; do
     createdb -U dendrite -O dendrite dendrite_$db
 done

cmd/dendrite-sync-api-server/main.go

@@ -37,7 +37,7 @@ func main() {
 
 	base.SetupAndServeHTTP(
 		base.Cfg.SyncAPI.InternalAPI.Listen,
-		setup.NoExternalListener,
+		base.Cfg.SyncAPI.ExternalAPI.Listen,
 		nil, nil,
 	)
 }

dendrite-config.yaml

@@ -277,6 +277,8 @@ sync_api:
   internal_api:
     listen: http://localhost:7773
     connect: http://localhost:7773
+  external_api:
+    listen: http://[::]:8073
   database:
     connection_string: file:syncapi.db
     max_open_conns: 100

internal/config/config_syncapi.go

@@ -4,6 +4,7 @@ type SyncAPI struct {
 	Matrix *Global `yaml:"-"`
 
 	InternalAPI InternalAPIOptions `yaml:"internal_api"`
+	ExternalAPI ExternalAPIOptions `yaml:"external_api"`
 
 	Database DatabaseOptions `yaml:"database"`
 }
@@ -11,6 +12,7 @@ type SyncAPI struct {
 func (c *SyncAPI) Defaults() {
 	c.InternalAPI.Listen = "http://localhost:7773"
 	c.InternalAPI.Connect = "http://localhost:7773"
+	c.ExternalAPI.Listen = "http://localhost:8073"
 	c.Database.Defaults()
 	c.Database.ConnectionString = "file:syncapi.db"
 }
@@ -18,5 +20,8 @@ func (c *SyncAPI) Defaults() {
 func (c *SyncAPI) Verify(configErrs *ConfigErrors, isMonolith bool) {
 	checkURL(configErrs, "sync_api.internal_api.listen", string(c.InternalAPI.Listen))
 	checkURL(configErrs, "sync_api.internal_api.bind", string(c.InternalAPI.Connect))
+	if !isMonolith {
+		checkURL(configErrs, "sync_api.external_api.listen", string(c.ExternalAPI.Listen))
+	}
 	checkNotEmpty(configErrs, "sync_api.database", string(c.Database.ConnectionString))
 }

internal/setup/base.go

@@ -287,7 +287,7 @@ func (b *BaseDendrite) SetupAndServeHTTP(
 	}
 	externalServ := internalServ
 
-	if externalAddr != "" && externalAddr != internalAddr {
+	if externalAddr != NoExternalListener && externalAddr != internalAddr {
 		externalRouter = mux.NewRouter()
 		externalServ = &http.Server{
 			Addr:         string(externalAddr),
@@ -306,21 +306,6 @@ func (b *BaseDendrite) SetupAndServeHTTP(
 	externalRouter.PathPrefix(httputil.PublicFederationPathPrefix).Handler(b.PublicFederationAPIMux)
 	externalRouter.PathPrefix(httputil.PublicMediaPathPrefix).Handler(b.PublicMediaAPIMux)
 
-	go func() {
-		logrus.Infof("Starting %s listener on %s", b.componentName, externalServ.Addr)
-		if certFile != nil && keyFile != nil {
-			if err := externalServ.ListenAndServeTLS(*certFile, *keyFile); err != nil {
-				logrus.WithError(err).Fatal("failed to serve HTTPS")
-			}
-		} else {
-			if err := externalServ.ListenAndServe(); err != nil {
-				logrus.WithError(err).Fatal("failed to serve HTTP")
-			}
-		}
-		logrus.Infof("Stopped %s listener on %s", b.componentName, externalServ.Addr)
-	}()
-
-	if internalAddr != "" && internalAddr != externalAddr {
 	go func() {
 		logrus.Infof("Starting %s listener on %s", b.componentName, internalServ.Addr)
 		if certFile != nil && keyFile != nil {
@@ -334,6 +319,21 @@ func (b *BaseDendrite) SetupAndServeHTTP(
 		}
 		logrus.Infof("Stopped %s listener on %s", b.componentName, internalServ.Addr)
 	}()
+
+	if externalAddr != NoExternalListener && internalAddr != externalAddr {
+		go func() {
+			logrus.Infof("Starting %s listener on %s", b.componentName, externalServ.Addr)
+			if certFile != nil && keyFile != nil {
+				if err := externalServ.ListenAndServeTLS(*certFile, *keyFile); err != nil {
+					logrus.WithError(err).Fatal("failed to serve HTTPS")
+				}
+			} else {
+				if err := externalServ.ListenAndServe(); err != nil {
+					logrus.WithError(err).Fatal("failed to serve HTTP")
+				}
+			}
+			logrus.Infof("Stopped %s listener on %s", b.componentName, externalServ.Addr)
+		}()
 	}
 
 	select {}