* Use content_value instead of membership
* Fix build
* Replace publicroomsapi with a combination of clientapi/roomserver/currentstateserver
- All public rooms paths are now handled by clientapi
- Requests to (un)publish rooms are sent to the roomserver via `PerformPublish`
which are stored in a new `published_table.go`
- Requests for public rooms are handled in clientapi by:
* Fetch all room IDs which are published using `QueryPublishedRooms` on the roomserver.
* Apply pagination parameters to the slice.
* Do a `QueryBulkStateContent` request to the currentstateserver to pull out
required state event *content* (not entire events).
* Aggregate and return the chunk.
Mostly but not fully implemented (DB queries on currentstateserver are missing)
* Fix pq query
* Make postgres work
* Make sqlite work
* Fix tests
* Unbreak pagination tests
* Linting
* Fix rooms v3 url paths for good - with tests
- Add a test rig around `federationapi` to test routing.
- Use `JSONVerifier` over `KeyRing` so we can stub things out more easily.
- Add `test.NopJSONVerifier` which verifies nothing.
- Add `base.BaseMux` which is the original `mux.Router` used to spawn public/internal routers.
- Listen on `base.BaseMux` and not the default serve mux as it cleans paths which we don't want.
- Factor out `ListenAndServe` to `test.ListenAndServe` and add flag for listening on TLS.
* Fix comments
* Linting
* Remove clientapi producers which aren't actually producers
They are actually just convenience wrappers around the internal APIs
for roomserver/eduserver. Move their logic to their respective `api`
packages and call them directly.
* Remove TODO
* unbreak ygg
* Separate muxes for public and internal APIs
* Update client-api-proxy and federation-api-proxy so they don't add /api to the path
* Tidy up
* Consistent HTTP setup
* Set up prefixes properly
* WIP get_missing_events work
* More WIP get_missing_events work
* First working /get_missing_events implementation
Flakey currently due to racing between /sync and /send
* Final tweaks
* Remove log lines
* Linting
* go mod tidy
* Clamp min depth to 0
* sort events by depth because sytest makes me sad
Specifically I think it's
4172585c25/lib/SyTest/Federation/Client.pm (L265)
to blame here.
* Consolidation of roomserver APIs
* Comment out alias tests for now, they are broken
* Wire AS API into roomserver again
* Roomserver didn't take asAPI param before so return to that
* Prevent roomserver asking AS API for alias info
* Rename some files
* Remove alias_test, incoherent tests and unwanted appservice integration
* Remove FS API inject on syncapi component
* Make backfill work for shared history visibility
* fetch missing state on backfill to remember snapshots correctly
* Fix gmsl to not mux in auth events into room state
* Whoops
* Linting
* Define an input API for the federationsender
* Wiring for rooomserver input API and federation sender input API
* Whoops, commit common too
* Merge input API into query API
* Rename FederationSenderQueryAPI to FederationSenderInternalAPI
* Fix dendritejs
* Rename Input to Perform
* Fix a couple of inputs -> performs
* Remove needless storage interface, add comments
* Update gomatrixserverlib
* Default to room version 4
* Update gomatrixserverlib
* Limit prev_events and auth_events
* Fix auth_events, prev_events
* Fix linter issues
* Update gomatrixserverlib
* Fix getState
* Update sytest-whitelist
* Squashed commit of the following:
commit 067b875063
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Fri Apr 3 14:29:06 2020 +0100
Invites v2 endpoint (#952)
* Start converting v1 invite endpoint to v2
* Update gomatrixserverlib
* Early federationsender code for sending invites
* Sending invites sorta happens now
* Populate invite request with stripped state
* Remodel a bit, don't reflect received invites
* Handle invite_room_state
* Handle room versions a bit better
* Update gomatrixserverlib
* Tweak order in destinationQueue.next
* Revert check in processMessage
* Tweak federation sender destination queue code a bit
* Add comments
commit 955244c092
Author: Ben B <benne@klimlive.de>
Date: Fri Apr 3 12:40:50 2020 +0200
use custom http client instead of the http DefaultClient (#823)
This commit replaces the default client from the http lib with a custom one.
The previously used default client doesn't come with a timeout. This could cause
unwanted locks.
That solution chosen here creates a http client in the base component dendrite
with a constant timeout of 30 seconds. If it should be necessary to overwrite
this, we could include the timeout in the dendrite configuration.
Here it would be a good idea to extend the type "Address" by a timeout and
create an http client for each service.
Closes#820
Signed-off-by: Benedikt Bongartz <benne@klimlive.de>
Co-authored-by: Kegsay <kegan@matrix.org>
* Update sytest-whitelist, sytest-blacklist
* Update go.mod/go.sum
* Add some error wrapping for debug
* Add a NOTSPEC to common/events.go
* Perform state resolution at send_join
* Set default room version to v2 again
* Tweak GetCapabilities
* Add comments to ResolveConflictsAdhoc
* Update sytest-blacklist
* go mod tidy
* Update sytest-whitelist, sytest-blacklist
* Update versions
* Updates from review comments
* Update sytest-blacklist, sytest-whitelist
* Check room versions compatible at make_join, add some comments, update gomatrixserverlib, other tweaks
* Set default room version back to v2
* Update gomatrixserverlib, sytest-whitelist
* Start converting v1 invite endpoint to v2
* Update gomatrixserverlib
* Early federationsender code for sending invites
* Sending invites sorta happens now
* Populate invite request with stripped state
* Remodel a bit, don't reflect received invites
* Handle invite_room_state
* Handle room versions a bit better
* Update gomatrixserverlib
* Tweak order in destinationQueue.next
* Revert check in processMessage
* Tweak federation sender destination queue code a bit
* Add comments
* Move current work into single branch
* Initial massaging of clientapi etc (not working yet)
* Interfaces for accounts/devices databases
* Duplicate postgres package for sqlite3 (no changes made to it yet)
* Some keydb, accountdb, devicedb, common partition fixes, some more syncapi tweaking
* Fix accounts DB, device DB
* Update naffka dependency for SQLite
* Naffka SQLite
* Update naffka to latest master
* SQLite support for federationsender
* Mostly not-bad support for SQLite in syncapi (although there are problems where lots of events get classed incorrectly as backward extremities, probably because of IN/ANY clauses that are badly supported)
* Update Dockerfile -> Go 1.13.7, add build-base (as gcc and friends are needed for SQLite)
* Implement GET endpoints for account_data in clientapi
* Nuke filtering for now...
* Revert "Implement GET endpoints for account_data in clientapi"
This reverts commit 4d80dff458.
* Implement GET endpoints for account_data in clientapi (#861)
* Implement GET endpoints for account_data in clientapi
* Fix accountDB parameter
* Remove fmt.Println
* Fix insertAccountData SQLite query
* Fix accountDB storage interfaces
* Add empty push rules into account data on account creation (#862)
* Put SaveAccountData into the right function this time
* Not sure if roomserver is better or worse now
* sqlite work
* Allow empty last sent ID for the first event
* sqlite: room creation works
* Support sending messages
* Nuke fmt.println
* Move QueryVariadic etc into common, other device fixes
* Fix some linter issues
* Fix bugs
* Fix some linting errors
* Fix errcheck lint errors
* Make naffka use postgres as fallback, fix couple of compile errors
* What on earth happened to the /rooms/{roomID}/send/{eventType} routing
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Pass cfg by reference around the codebase
* Merge branch 'master' into pass-cfg-by-ref
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
Fix the /send_join and /send_leave endpoints, so that they use the v2 endpoints as mandated by MSC1802. Also comment out the SyTest tests that are failing because of lack of support for the v1 endpoints.
We were escaping the URL before performing any pattern matching on it.
This meant that if you sent data that URLdecoded to a "/", it would count as
a "/" in the URL, potentially causing a 404. This was causing some flaky tests
with some randomly-generated query parameters.
Now, we keep URLs encoded while doing the pattern matching, and only afterwards
do we URL decode each query parameter individually before passing them to their
respective handler functions.
github.com/gorilla/mux was also updated to v1.7.3 to fix a bug with URL encoding and subrouters.
