This is apparently some incorrect behaviour that we built as a result of
a spec bug (matrix-org/matrix-spec#1314) where we were applying a filter
to the `"state"` section of the `/sync` response incorrectly. The client
then has no way to know that the state was limited.
This PR removes the state limiting, which probably also helps #2842.
This makes the following changes:
- get state deltas without the user supplied filter, so we can actually
"calculate" state transitions
- closes `stmt` when using SQLite
- Adds presence for users who newly joined a room, even if the syncing
user already knows about the presence status (should fix
https://github.com/matrix-org/complement/pull/516)
Use the stream positions of the notifier, which might have advanced
since setting it at the beginning of the loop. This possibly helps in
reducing roundtrips to the SyncAPI, just because we didn't fetch the
latest data.
Also fixes a minor oversight in the receipts stream.
This now uses a transaction per stream, so that errors in one stream
don't propagate to another, and we therefore no longer need to do hacks
to reopen a new transaction after aborting a failed one.
This should transactional snapshot isolation for `/sync` etc requests.
For now we don't use repeatable read due to some odd test failures with
invites.
- Reverts 9dc57122d9 as it was causing issues https://github.com/matrix-org/dendrite/issues/2660
- Updates the GMSL `DefaultStateFilter` to use a limit of 20 events
- Uses the timeline events to determine the new position instead of the state events
* Add race testing to tests, and fix a few small race conditions in the tests
* Enable run-sytest on MacOS
* Remove deadlock detecting mutex, per code review feedback
* Remove autoformatting related changes and a closure that is not needed
* Adjust to importing nats client as 'natsclient'
Signed-off-by: Brian Meek <brian@hntlabs.com>
* Clarify the use of gooseMutex to proect goose internal state
Signed-off-by: Brian Meek <brian@hntlabs.com>
* Remove no longer needed mutex for guarding goose
Signed-off-by: Brian Meek <brian@hntlabs.com>
* Add function to the sync API storage package for filtering shared users
* Use the database instead of asking the RS API
* Fix unit tests
* Fix map handling in `filterSharedUsers`
* syncapi: don't return early for no-op incremental syncs
Comments explain why, but basically it's an inefficient use
of bandwidth and some sytests rely on /sync to block.
* Honour timeouts
* Actually return a response with timeout=0
* bugfix: fix race condition when updating presence via /sync
Previously when presence is updated via /sync, we would send the presence update
asyncly via NATS. This created a race condition:
- If the presence update is processed quickly, the /sync which triggered the presence
update would see an online presence.
- If the presence update was processed slowly, the /sync which triggered the presence
update would see an offline presence.
This is the root cause behind the flakey sytest: 'User sees their own presence in a sync'.
The fix is to ensure we update the database/advance the stream position synchronously
for local users.
* Bugfix for test
* Fix OTK spam
* Update comment
* Optimize selectKeysCountSQL to only return max 100 keys
* Return CurrentPosition if the request timed out
* Revert "Return CurrentPosition if the request timed out"
This reverts commit 7dbdda9641.
Co-authored-by: kegsay <kegan@matrix.org>
* Add very basic syncapi tests
* Add a way to inject jetstream messages
* implement add_state_ids
* bugfixes
* Unbreak tests
* Remove now un-needed API call
* Linting
* syncapi: use finer-grained interfaces when making the syncapi
* Use specific interfaces for syncapi-roomserver interactions
* Define query access token api for shared http auth code
* Initial phone home stats queries
* Add userAgent to UpdateDeviceLastSeen
Add new Table for tracking daily user vists
* Add user_daily_visits table
* Fix queries
* userapi stats tables & queries
* userapi interface and internal api
* sycnapi stats queries
* testing phone home stats
* Add complete config to syncapi
* add missing files
* Fix queries
* Send empty request
* Add version & monolith stats
* Add configuration for phone home stats
* Move WASM to its own file, add config and comments
* Add tracing methods
* Add total rooms
* Add more fields, actually send data somewhere
* Move stats to the userapi
* Move phone home stats to util package
* Cleanup
* Linter & parts of GH comments
* More GH comments changes
- Move comments to SQL statements
- Shrink interface, add struct for stats
- No fatal errors, use defaults
* Be more explicit when querying
* Fix wrong calculation & wrong query params
Add tests
* Add Windows stats
* ADd build constraint
* Use new testing structure
Fix issues with getting values when using SQLite
Fix wrong AddDate value
Export UpdateUserDailyVisits
* Fix query params
* Fix test
* Add comment about countR30UsersSQL and countR30UsersV2SQL; fix test
* Update config
* Also update example config file
* Use OS level proxy, update logging
Co-authored-by: kegsay <kegan@matrix.org>
* Use filter and limit presence count
* More limiting
* More limiting
* Fix unit test
* Also limit presence by last_active_ts
* Update query, use "from" as the initial lastPos
* Get 1000 presence events, they are filtered later
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Don't create fictitious presence entries for users that don't have any
* Update whitelist, since that test probably shouldn't be passing
* Fix panics
Squashed commit of the following:
commit 0ec8de57261d573a5f88577aa9d7a1174d3999b9
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Tue Apr 26 16:56:30 2022 +0100
Select filter onto provided target filter
commit da40b6fffbf5737864b223f49900048f557941f9
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Tue Apr 26 16:48:00 2022 +0100
Specify other field too
commit ffc0b0801f63bb4d3061b6813e3ce5f3b4c8fbcb
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Tue Apr 26 16:45:44 2022 +0100
Send as much account data as possible during complete sync
* Add response size and requests total to internal handler
* Move MustRegister calls to New* funcs
* Move MustRegister back to init
* Init at some place, minimize changes
* Add Pushserver component with Pushers API
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Dan Peleg <dan@globekeeper.com>
* Wire Pushserver component
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* Add PushGatewayClient.
The full event format is required for Sytest.
* Add a pushrules module.
* Change user API account creation to use the new pushrules module's defaults.
Introduces "scope" as required by client API, and some small field
tweaks to make some 61push Sytests pass.
* Add push rules query/put API in Pushserver.
This manipulates account data over User API, and fires sync messages
for changes. Those sync messages should, according to an existing TODO
in clientapi, be moved to userapi.
Forks clientapi/producers/syncapi.go to pushserver/ for later extension.
* Add clientapi routes for push rules to Pushserver.
A cleanup would be to move more of the name-splitting logic into
pushrules.go, to depollute routing.go.
* Output rooms.join.unread_notifications in /sync.
This is the read-side. Pushserver will be the write-side.
* Implement pushserver/storage for notifications.
* Use PushGatewayClient and the pushrules module in Pushserver's room consumer.
* Use one goroutine per user to avoid locking up the entire server for
one bad push gateway.
* Split pushing by format.
* Send one device per push. Sytest does not support coalescing
multiple devices into one push. Matches Synapse. Either we change
Sytest, or remove the group-by-url-and-format logic.
* Write OutputNotificationData from push server. Sync API is already
the consumer.
* Implement read receipt consumers in Pushserver.
Supports m.read and m.fully_read receipts.
* Add clientapi route for /unstable/notifications.
* Rename to UpsertPusher for clarity and handle pusher update
* Fix linter errors
* Ignore body.Close() error check
* Fix push server internal http wiring
* Add 40 newly passing 61push tests to whitelist
* Add next 12 newly passing 61push tests to whitelist
* Send notification data before notifying users in EDU server consumer
* NATS JetStream
* Goodbye sarama
* Fix `NewStreamTokenFromString`
* Consume on the correct topic for the roomserver
* Don't panic, NAK instead
* Move push notifications into the User API
* Don't set null values since that apparently causes Element upsetti
* Also set omitempty on conditions
* Fix bug so that we don't override the push rules unnecessarily
* Tweak defaults
* Update defaults
* More tweaks
* Move `/notifications` onto `r0`/`v3` mux
* User API will consume events and read/fully read markers from the sync API with stream positions, instead of consuming directly
Co-authored-by: Piotr Kozimor <p1996k@gmail.com>
Co-authored-by: Tommie Gannert <tommie@gannert.se>
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
* go mod tidy
* Break complement to check it fails CI
* Remove partitioned stream positions
This was used by the device list stream position. The device list position
now corresponds to the `Offset`, and the partition is always 0, in prep
for removing reliance on Kafka topics for device list changes.
* Linting
* Migrate old style tokens to new style because element-web doesn't soft-logoout on 4xx errors on /sync
* Add some filtering (postgres only for now)
* Fix build error
* Try to use request filter
* Use default filter as a template when retrieving from the database
* Remove unused strut
* Update sytest-whitelist
* Add filtering to SelectEarlyEvents
* Fix Postgres selectEarlyEvents query
* Attempt filtering on SQLite
* Test limit, set field for limit/order in prepareWithFilters
* Remove debug logging, add comments
* Tweaks, debug logging
* Separate SQLite stream IDs
* Fix filtering in current state table
* Fix lock issues
* More tweaks
* Current state requires room ID
* Review comments
* It's half-alive
* Wakeups largely working
* Other tweaks, typing works
* Fix bugs, add receipt stream
* Delete notifier, other tweaks
* Dedupe a bit, add a template for the invite stream
* Clean up, add templates for other streams
* Don't leak channels
* Bring forward some more PDU logic, clean up other places
* Add some more wakeups
* Use addRoomDeltaToResponse
* Log tweaks, typing fixed?
* Fix timed out syncs
* Don't reset next batch position on timeout
* Add account data stream/position
* End of day
* Fix complete sync for receipt, typing
* Streams package
* Clean up a bit
* Complete sync send-to-device
* Don't drop errors
* More lightweight notifications
* Fix typing positions
* Don't advance position on remove again unless needed
* Device list updates
* Advance account data position
* Use limit for incremental sync
* Limit fixes, amongst other things
* Remove some fmt.Println
* Tweaks
* Re-add notifier
* Fix invite position
* Fixes
* Notify account data without advancing PDU position in notifier
* Apply account data position
* Get initial position for account data
* Fix position update
* Fix complete sync positions
* Review comments @Kegsay
* Room consumer parameters
* Update sync responses
* Fix positions, add ApplyUpdates
* Fix MarshalText as non-pointer, PrevBatch is optional
* Increment by number of read receipts
* Merge branch 'master' into neilalexander/devicelist
* Tweak typing
* Include keyserver position tweak
* Fix typing next position in all cases
* Tweaks
* Fix typo
* Tweaks, restore StreamingToken.MarshalText which somehow went missing?
* Rely on positions from notifier rather than manually advancing them
* Revert "Rely on positions from notifier rather than manually advancing them"
This reverts commit 53112a62cc.
* Give invites their own position, fix other things
* Fix test
* Fix invites maybe
* Un-whitelist tests that look to be genuinely wrong
* Use real receipt positions
* Ensure send-to-device uses real positions too
Squashed commit of the following:
commit 7ed1c6cfe67429dbe378a763d832c150eb0f781d
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Wed Dec 16 14:53:27 2020 +0000
Updates
commit 8442099d08760b8d086e6d58f9f30284e378a2cd
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Wed Dec 16 14:43:18 2020 +0000
Add some sync statistics
commit ffe2a11644ed3d5297d1775a680886c574143fdb
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Wed Dec 16 14:37:00 2020 +0000
Fix backing off display
commit 27443a93855aa60a49806ecabbf9b09f818301bd
Author: Neil Alexander <neilalexander@users.noreply.github.com>
Date: Wed Dec 16 14:28:43 2020 +0000
Add some destination queue metrics
* requestpool: fix initial sync logic error in appendAccountData()
In initial sync, req.since is no longer nil, but instead,
req.since.PDUPosition() and req.since.EDUPosition() returns 0.
This ensures forgotten rooms do not come back as zombies.
* syncapi/requestpool: reintroduce req.since == nil check
* Update last seen on sync requests
* Fix MSC2836 unit tests
* Only update once per minute
* Remove debug logging
* Configurable option
* Simplify updateLastSeen/cleanLastSeen
* fix conversion from int to string yields a string of one rune, not a string of digits
* Add receipts table to syncapi
* Use StreamingToken as the since value
* Add required method to testEDUProducer
* Make receipt json creation "easier" to read
* Add receipts api to the eduserver
* Add receipts endpoint
* Add eduserver kafka consumer
* Add missing kafka config
* Add passing tests to whitelist
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Fix copy & paste error
* Fix column count error
* Make outbound federation receipts pass
* Make "Inbound federation rejects receipts from wrong remote" pass
* Don't use errors package
* - Add TODO for batching requests
- Rename variable
* Return a better error message
* - Use OutputReceiptEvent instead of InputReceiptEvent as result
- Don't use the errors package for errors
- Defer CloseAndLogIfError to close rows
- Fix Copyright
* Better creation/usage of JoinResponse
* Query all joined rooms instead of just one
* Update gomatrixserverlib
* Add sqlite3 migration
* Add postgres migration
* Ensure required sequence exists before running migrations
* Clarification on comment
* - Fix a bug when creating client receipts
- Use concrete types instead of interface{}
* Remove dead code
Use key for timestamp
* Fix postgres query...
* Remove single purpose struct
* Use key/value directly
* Only apply receipts on initial sync or if edu positions differ,
otherwise we'll be sending the same receipts over and over again.
* Actually update the id, so it is correctly send in syncs
* Set receipt on request to /read_markers
* Fix issue with receipts getting overwritten
* Use fmt.Errorf instead of pkg/errors
* Revert "Add postgres migration"
This reverts commit 722fe5a046.
* Revert "Add sqlite3 migration"
This reverts commit d113b03f64.
* Fix selectRoomReceipts query
* Make golangci-lint happy
Co-authored-by: Neil Alexander <neilalexander@users.noreply.github.com>
